Silicone Sealants- MS polymer Sealant

MS Polymer Sealant (Modified Silicone Sealant)

Item: Aidmer-3000/3010 

PDF:

MS Polymer Sealant Features:

• One-component, medium modulus, acidic cure. Ease to use.
• Excellent weatherproofing ability.
• Excellent adhesion for most building materials including glass, ceramic, aluminum, plastic.

• Excellent contact-change ability, no seasonal limited use.

MS Polymer Sealant Purpose:

• Sealing of automobile parts, railway ,containers and ship (as bonding, caulks, door and window seals, floorboard gap and so on waterproofing.)

• Apply to metal containers , Air conditioning , plastic products and board Seals.

MS Polymer Sealant Application:

• The sealed place must be completely cleaned and dried. If necessary, washing them with solvents such as toluene or acetone.

• In order to keep better appear range. The joint of cover outside areas should be masked with tape before sealants apply.

• Sealant can be repaired immediately and the masking tape should be removed before the sealant skins.

• Previous using experiment is necessary beforehand.

MS Polymer Sealant Limitation:

• Don't use in structure glazing.

• Don't use in aquarium assembly and sealing.

• Don't use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins. Etc.

• Don't use in Mobility over ?0% connect joints.

• Don't use to joints which is hidden in earth or immersed in water for long time.

• Don't use to complete sealing space, results to lack of hydrosphere can't good solidify.

Factory Add: WanFu Economic & Technical Development Zone, WuNing, JiuJiang City, Jiangxi, China.

Office Add: 21/F, Junyuan of East Building, No.198,Changhong Road,Jiujiang City,Jiangxi Province,China.

Tel: 0086-792-2185818; 2185819; 2185899; 2185898 Fax:0086-(0)792-8585090

E-mail: sales@MSsealant.com

Copyright 2003-2007 AIDMER  All rights reserved