Neutral Silicone Sealants - Sealant for Aluminum

Silicone Sealant for Aluminum

Item: Aidmer-3998

PDF:

Sealant for Aluminum Features:

• One-component, medium modulus, neutral room temperature cure.
• Excellent weatherproofing ability and elasticity performance.
• Excellent tensile and compression restoring ability.
• Excellent adhesion especially to AL-Plastic board, glass and aluminum.
• Non-Irritant, No corrosive.

Sealant for Aluminum Purpose:

• Primarily use for glazing and sealing the seams between aluminum-plastic boards.
• Weatherproofing in repairing house, fitting aluminum door and windows.
• General decorate use.

Sealant for Aluminum Application:

• The sealed place must be completely cleaned and dried. If necessary, washing them with solvents such as toluene or acetone.
• In order to keep better appearance, the joint of cover outside areas should be masked with tape before sealants apply.
• Sealant can be repaired immediately and the masking tape should be removed before the sealant skins.
• Previous using experiment is necessary beforehand.

Sealant for Aluminum Limitation:

• Don't use as structure glue.
• Don't use in areas where no moisture has.
• Don't use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins.

Factory Add: WanFu Economic & Technical Development Zone, WuNing, JiuJiang City, Jiangxi, China.

Office Add: 21/F, Junyuan of East Building, No.198,Changhong Road,Jiujiang City,Jiangxi Province,China.

Tel: 0086-792-2185818; 2185819; 2185899; 2185898 Fax:0086-(0)792-8585090

E-mail: sales@MSsealant.com

Copyright 2003-2007 AIDMER  All rights reserved