Acetoxy Sealant - Glass Sealant

Massive Glass Sealant

Item: Aidmer-3992

PDF:

Glass Silicone Sealant Features:

• One-component, medium modulus, acidic cure, Ease to use.
• Excellent weatherproofing ability
• Excellent adhesion and good elasticity, designed for glass, aluminum, ceramic, stainless steel. Special for glass fitting.
• Excellent contact-change ability, No seasonal limited use.

Glass Silicone Sealant Purpose:

• Glass assembling, windows and door fitting, the joint of massive glass sealing.
• The curtain wall of glass fit and sealed.
• Flat glass fit and assembled on ceiling.

Glass Silicone Sealant Applicaion:

• The sealed place must be completely cleaned and dried. If necessary, washing them with solvents such as toluene or acetone.
• In order to keep better appearance. The joint of cover outside areas should be masked with tape before sealants apply.
• Sealant can be repaired immediately and the masking tape should be removed before the sealant skins. Previous using experiment is necessary before hand.

Glass Silicone Sealant Limitation:

• Don't use in areas where no moisture has.
• Don't use in places where have permeated grease, plasticizer or solvent such as wood permeated oil, uncured or half-cured resins. Etc.
• The products have poor adhesion to concrete, marble, mirror-glass, Zn-plated materials because of corrosion produced by acetic sealant. In this case, please select neutral silicone sealant.

Factory Add: WanFu Economic & Technical Development Zone, WuNing, JiuJiang City, Jiangxi, China.

Office Add: 21/F, Junyuan of East Building, No.198,Changhong Road,Jiujiang City,Jiangxi Province,China.

Tel: 0086-792-2185818; 2185819; 2185899; 2185898 Fax:0086-(0)792-8585090

E-mail: sales@MSsealant.com

Copyright 2003-2007 AIDMER  All rights reserved